For
  sassy,
  classy
  women
  motorcyclists

2008 with the low seat option; rider has 27" inseam

2005, standard seat of 27.5" high; rider has 28" inseam

2001 stock; rider has 30" inseam

2002 stock

2008 stock; rider has 33" inseam

1994 Hugger; recent photos, now lower 1¼" and can comfortably touch the ground.  

1999 Hugger, Badlander seat, pullback riser

2009 stock; rider has 30" inseam

2002 Hugger, rider has 28" inseam

2008 stock; rider is 5'3.5" with 30" inseam

2005 Custom

2006 Low, lowered by 1" with Progressive 412 shocks, modified Mustang seat; rider has 29" inseam

2003 Custom stock

2008 Custom

2003 Hugger stock, rider has 31.5" inseam

2000 Custom, lowered by about 2"; rider has 34.5" inseam

2007 Low, no mods, rider 5'1/2", 28" inseam

2002, front and back lowered by 1"

2002, front and rear Progressive shocks, shaved down Corbin Hollywood solo seat; rider has 25" inseam

2006 Low, 2" lowering through front forks and shorter shocks, HD Brawler seat, added forward controls

2006 XL Low

2007 stock

2008 Nightster; changed to Sundowner seat and added forward controls

2007 stock Low

2008 Nightster with forward controls

2003 with reduced reach pegs

2002 stock

2007 stock

2003 stock, rider has 31" inseam

2008 stock; rider has 33" inseam

2007 stock; rider has 31" inseam

2006, added HD Reach seat

2010 with forward controls, adjusted mini apes and Le Pera solo seat

2008 stock; rider has 33" inseam

2001 (1450cc that year), lowered 1" using 11" Progressive shocks

2002; added an easy clutch bracket and Wyatt Fuller pullback handlebars; changed the seat from stock to a Corbin "Gunfighter," which pushed me forward about 1". The Corbin seat is narrow and increased my reach to the ground; Progressive lowered shocks on the back and pushed the front forks up through the triple tree exactly 1" on each side.

2007, lowered shocks, 11" Progressive 412s, Badlander Seat with nose area shaved to make narrower.

2007, lowered 1" in rear with Progressive shocks; H-D Reach seat added.

2008 stock

2007 stock; rider has 29" inseam

2008 stock; flat foot at a stop

2007 stock; rider has 33" inseam

2008, rider has 33" inseam, no mods

2008 stock; rider has 33" inseam

2005 Deluxe stock; seat height is 2.4" lower than stock Custom

2006 Deluxe stock; rider has 29.5" inseam

2009 Deluxe; changed to Sundowner seat

2008 Deluxe stock; rider has 30" inseam

2003; rider has 27" inseam; Arlen Ness Lowering Kit front/back by 2"; Corbin Gunfighter Solo Seat; Jiffy Stand Extension for reachability; Swingback Handlebar for comfort & control; Kuryakyn Brake Pedal..wider than stock for reachability around air filter

2007 stock

2010 Lo; I had 10" mini apes installed because of a reach problem, it's perfect now, I don't have to lean forward at all, I'm sitting in the motorcycle, not on top!

2005; Progressive shocks, lowered 2 inches, 5 inch pull back risers, Danny Grey solo seat

2009; lowered 1.5", handlebar adjusted to closest position, but a bit of pullback may be added later; rider has 30.5" inseam

2008 stock; rider inseam is 32"

2008 stock, rider inseam is 31.5"

2002, rider inseam is 31", 9" lift buckhorn handlebar with 3" riser, Mustang seat

2005 stock; rider has 32" inseam

2008 Rocker C with standard Rocker seat

2003 Classic, no mods

2007 Custom, stock

2007 Custom, stock

2008, front and rear lowered, HD Reach seat; rider has 30" inseam; still wants pullback riser added

2009, Front End Lowered (*bike comes stock w/back lowered),
HD 2" pull back handlebars, HD Reach seat, Tour pak. 

* As I weigh 138 lbs., most bikes are set-up for 180 lbs. rider  The Reach seat moved the riders weight forward.... the tour pak helped with more weight on the back...the bike rode stiff w/o tour pak...now it rides a lot better.   As the shocks get broke in...this will be even better.

2004 Standard stock